Key Features:
- Hardened and plated reinforced steel backbone
- Angled tip to divert mud and rain away from the rim
- Water groves
- Pad-Lock washer system
- Power Stop design
- Weight: ca. 56 g/pair
- Overall length: 64 mm
- Pad contact width: 10 mm
- Made in the USA
The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. The extended pad length and off centre post design provides even wear for longer life. A water groove is located below the mounting post for optimal water dispersion. An angled plow tip is featured for rain and mud removal. Supplied with the Power-Stop system which provides correct toe in during installation and allows alignment to any rim angle
The special Silver compound is for use in all conditions
Installation Instructions:
- Clean the rim surface before installing new pads
- Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
- Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts. Do not over tighten
- Break In Pads. Full stopping power may not develop until after several braking applications have conditioned the rim surface. Proper "toe in" alignment prevents brake chatter
- Check the pad and rim alignment after the pads are broken in and after every ride
- Important: Do not ride the bike until the brakes are checked and functioning properly. Designed for bicycle use only. All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards
Supplied as a pair