Kool-Stop Campi Chorus Replacement Brake Pads
Key Features:
- Length: 40 mm
- Weight: ca. 18 gr/pair
- Made in the USA
These are excellent replacements for vintage Campi Chorus brake shoe holders. They fit exactly so no trimming is needed. These pads offer a premium quality replacement pad for original restoration projects and everyday use
The special Black compound is designed for use in drier conditions
Installation Instructions:
- Clean the rim surface before installing new pads
- Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
- Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts. Do not over tighten
- Break In Pads. Full stopping power may not develop until after several braking applications have conditioned the rim surface. Proper "toe in" alignment prevents brake chatter
- Check the pad and rim alignment after the pads are broken in and after every ride
- Important: Do not ride the bike until the brakes are checked and functioning properly. Designed for bicycle use only. All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards
2 pairs supplied
Kool-Stop Campi Delta C Record Replacement Brake Pads
Key Features:
- Length: 44 mm
- Weight: 15 grams per pair
- Made in the USA
These are excellent replacements for vintage Campi Delta C Record brake systems. They fit exactly so no trimming is needed. These pads offer a premium quality replacement pad for original restoration projects and everyday use
The Salmon compound is for wet and muddy conditions
Installation Instructions:
- Clean the rim surface before installing new pads
- Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
- Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts. Do not over tighten
- Break In Pads. Full stopping power may not develop until after several braking applications have conditioned the rim surface. Proper "toe in" alignment prevents brake chatter
- Check the pad and rim alignment after the pads are broken in and after every ride
- Important: Do not ride the bike until the brakes are checked and functioning properly. Designed for bicycle use only. All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards
2 pairs supplied
Kool-Stop Campi Classic Nuovo Record 2 Inserts
Key Features:
- Weight: ca. 15 gr/pair
- 12 mm wide
- 9 mm at narrow section
- 40 mm length
- Made in the USA
These pads will look 'period correct' on your Campi brakes but will provide stopping power far superior to the standard inserts. These are excellent replacements for the classic Nuovo Record era 1970s - 80s and most old school holders. They also fit Mafacn and other shoe holders. The dovetail fitting is 12 mm wide, 9 mm at the narrow section
The special Salmon compound is for use in wet and muddy conditions
Installation Instructions:
- Clean the rim surface before installing new pads
- Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
- Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts. Do not over tighten
- Break In Pads. Full stopping power may not develop until after several braking applications have conditioned the rim surface. Proper "toe in" alignment prevents brake chatter
- Check the pad and rim alignment after the pads are broken in and after every ride
- Important: Do not ride the bike until the brakes are checked and functioning properly. Designed for bicycle use only. All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards
2 pairs supplied