Key Features:
- Alloy cooling fins
- Anodized high gloss finish
- Rim friendly
- High friction co effcient = easy stopping
- Steady braking - low fade
- Stops short - wears long
- Length: 31.5 mm
- Weight: ca. 58 g/pair
- Made in the USA
The pad that started it all. The International pad was the first pad produced by Kool-Stop and is where Kool-Stop got its name from. With circular fins which provide efficient cooling and less heat build up
The Black compound is for use in mainly dry conditions
Installation Instructions:
- Clean the rim surface before installing new pads
- Place the new Kool-Stop pads into the brake caliper arms and finger tighten the nuts
- Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts. Do not over tighten
- Break In Pads. Full stopping power may not develop until after several braking applications have conditioned the rim surface. Proper "toe in" alignment prevents brake chatter
- Check the pad and rim alignment after the pads are broken in and after every ride
- Important: Do not ride the bike until the brakes are checked and functioning properly. Designed for bicycle use only. All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards
Supplied as a pair